Knowledge base helps you find answers to the most asked questions

Knowledge Base

LTE Frequency Band Supported

LTE Frequency Band Supported

What is the default IP of Ursalink Industrial Cellular Router?

The default IP of Ursalink Industrial Cellular Router is 192.168.1.1

What is a dynamic IP address?

In simple terms, it is the opposite of a fixed IP address.
An IP address will be assigned to a machine when it connects to a network. However, when the machine disconnects, it will lose the IP address. It will obtain a new IP address next time when it connects to the network.

How to change the password of the administrator account?

Please go to “System” > “User Management” > “Account” to change the password after you log in the Web GUI.

What is a Private APN?

A Private APN gives customers direct access to their LAN and allows them to specify certain parameters such as the private address space allocated to the devices & RADIUS server attributed for user authentication. You are also able to access the Internet.

What is a Public APN?

Every network provider has a public APN. When the SIM card is enabled for data, e.g. GPRS/3G,etc, the public APN will be added by default. A Public APN is open for everyone to use.

What is a Public IP address?

Public IP addresses are IP addresses that are visible to the public. Because these IP addresses are public, they allow other people to know about and access the device, like a Web server.

What is a VPN tunnel?

A VPN is a private network that uses a public network (usually the Internet) to connect to devices with Private IP addresses from a machine through your LAN or from home. Instead of using a dedicated and real-world connection such as leased line, a VPN uses “virtual” connections routed through the Internet from the company’s private network to the remote device. The VPN tunnel would be used for those who have a private IP address on their SIMs.

What is a site-to-site VPN tunnel?

A site-to-site VPN tunnel is an network environment where two firewalls are used to create a VPN tunnel. By Wireless Logic, we use IPSEC VPN tunnels. We configure a firewall on our side and then send the config parameters to customer. The customer then need to enter the config parameters onto their firewall/router. This would enable any machine(s) on a company’s LAN to connect to its devices with our m2m SIMs and vice versa. This is an always-on VPN connection. To create a site-to-site tunnel, customers need to have a hardware firewall/router which is capable of setting up an IPSEC VPN tunnel.

What is HSDPA/HSUPA?

High-Speed Downlink Packet Access (HSDPA) is a new mobile telephony protocol and is sometimes referred to as a 3.5G (or 3½G) technology. HSDPA provides a smooth evolutionary path for Universal Mobile Telecommunications System (UMTS) networks allowing for higher data capacity (up to 14.4 Mbit/s per cell in the downlink and 2 Mbit/s in the uplink per cell). High-Speed Uplink Packet Access (HSUPA) is a 3G mobile telephony protocol in the HSPA family with up-link speeds up to 5.76 Mbit/s.

How to setup your own OpenVPN on Windows?

View the application notes: How to Setup Your Own OpenVPN on Windows

How to establish OpenVPN connection with Ursalink?

View the application notes: How to Establish OpenVPN Connection with Ursalink