ChirpStack | Connect Ursalink LoRaWAN Gateway/Nodes to ChirpStack

chirpstack-ursalink -lorawan

 

Download PDF: How to Connect LoRaWAN Gateway/Node to ChirpStack

 

 

The ChirpStack open-source LoRaWAN Network Server stack (check it out) provides open-source components for LoRaWAN networks. Together they form a ready-to-use solution including a user-friendly web-interface for device management and APIs for integration. The modular architecture makes it possible to integrate within existing infrastructures. All components are licensed under the MIT license and can be used for commercial purposes. It supports Class A, Class B, and Class C modes, as well as adaptive data-rate, live-frame logging, channel configuration, multi-tenant, APIs and integration, etc.

 

Connect UG85/UG87 to ChirpStack

  • Add Gateway Profile

loraserver

  • Add Gateway. Gateway ID is the gateway EUI of UG85/UG87.

loraserver

  • You could check the details of the gateway after adding Gateway.

Note: If GPS data is not seen, please check if you install GPS antenna and put gateway at a place with a strong signal.

loraserver

 

Connect UC11xx/UC11-T1/UC11-N1 to ChirpStack

  • Add Device-profile according to the type of your Ursalink LoRaWAN nodes.

chirpstack-4

  • If the join-type is OTAA, please enable “Device supports OTAA”.

chirpstack-5

  • Choose a suitable payload codec according to your requirements. You can also customize your Javascript decoder.

chirpstack-6

  • Add an Application

chirpstack-7
chirpstack-8

  • Add Device. There are two types of joining networks: OTAA and ABP.

chirpstack-9

 

Join in OTAA mode

  • Choose OTAA device profile.

loraserver

  • After adding the device, please fill in the APP key of LoRaWAN node.

loraserver